Difference between revisions of "Workstation Installation Instructions"

From Agency Systems Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 32: Line 32:
 
*Verify the workstation is running a current version of Microsoft Windows. As of 2025-10-14 Windows 10 reached end-of-life. See [https://support.microsoft.com/en-us/windows/windows-10-support-ends-on-october-14-2025-2ca8b313-1946-43d3-b55c-2b95b107f281 https://support.microsoft.com/en-us/windows/windows-10-support-ends-on-october-14-2025-2ca8b313-1946-43d3-b55c-2b95b107f281].
 
*Verify the workstation is running a current version of Microsoft Windows. As of 2025-10-14 Windows 10 reached end-of-life. See [https://support.microsoft.com/en-us/windows/windows-10-support-ends-on-october-14-2025-2ca8b313-1946-43d3-b55c-2b95b107f281 https://support.microsoft.com/en-us/windows/windows-10-support-ends-on-october-14-2025-2ca8b313-1946-43d3-b55c-2b95b107f281].
 
*Review the [[Installation Environment and Network Requirements]] and [[Hardware Recommendations]].
 
*Review the [[Installation Environment and Network Requirements]] and [[Hardware Recommendations]].
−
*Login to the machine as a local Administrative user.  
+
===Map Drive As Admin and run Adduser===
 +
#Login to Windows as the user.
 +
#Run CMD as administrator.
 +
#:[[File:wss.2.png]]
 +
#Map a network drive to the share on your file server where Newton is installed. Use the same drive letter on every machine e.g.:
 +
#:'''net use s: \\newton-server\asApps'''
 +
#Change directory to the empire\programs directory on the mapped drive e.g.:
 +
#:'''cd /d s:\empire\programs'''
 +
#Run '''adduser.exe''' and click Begin.
 +
#:[[File:wss.3.png]]
 +
 
 
===Map Drive as User===
 
===Map Drive as User===
−
#Open CMD
+
#Open CMD.
 
#:[[File:wss.0.png]]
 
#:[[File:wss.0.png]]
−
#Map a network drive to the share on your file server where Newton is installed. Use the same drive letter on every machine e.g.:
+
#Map the network drive e.g.:
 
#:'''net use  s:  \\newton-server\asapps
 
#:'''net use  s:  \\newton-server\asapps
 
#:[[File:wss.1.png]]
 
#:[[File:wss.1.png]]
−
#Exit CMD
+
#Exit CMD.
−
===Map Drive As Admin and run Adduser===
 
−
#Run CMD as administrator
 
−
#:[[File:wss.2.png]]
 
−
#Map the network drive as admin
 
−
#Change directory to the empire\programs directory on the mapped drive, e.g.:
 
−
#:'''cd /d s:\empire\programs'''
 
−
#Run '''adduser.exe''' and click Begin
 
−
#:[[File:wss.3.png]]
 
  
 
===Run Newton to Complete Setup===
 
===Run Newton to Complete Setup===

Latest revision as of 14:22, 30 October 2025

Ic description black 24dp.png Newton User Guide: Installation
Related Pages
Related Categories

Instructions

Map Drive As Admin and run Adduser

  1. Login to Windows as the user.
  2. Run CMD as administrator.
    Wss.2.png
  3. Map a network drive to the share on your file server where Newton is installed. Use the same drive letter on every machine e.g.:
    net use s: \\newton-server\asApps
  4. Change directory to the empire\programs directory on the mapped drive e.g.:
    cd /d s:\empire\programs
  5. Run adduser.exe and click Begin.
    Wss.3.png

Map Drive as User

  1. Open CMD.
    Wss.0.png
  2. Map the network drive e.g.:
    net use s: \\newton-server\asapps
    Wss.1.png
  3. Exit CMD.

Run Newton to Complete Setup

Double click the Agency Systems icon on the desktop to run Newton. You may get two User-Account-Control message boxes asking to run RWEasyMapi64.exe requiring admin elevation, and another to run mariadb-connector32-3-1-11.msi. Enter the local admin user and password to run them.

  1. Wss.4.png

Login

Have the user login to test, or use

  • Agency: 95
  • Operator: DCS
  • Password: EMPYRE

LEGACY Pervasive Client Installation

Open a new command prompt as Administrator. 

x:
cd empire
PSQL11.3Client32.exe
  1. Select Yes
    WorkstationInstall4.jpeg
  2. Select Unzip
    WorkstationInstall5.jpeg
  3. Select Ok
    WorkstationInstall6.jpeg
  4. Select Install
    WorkstationInstall7.jpeg
  5. Select Next
    WorkstationInstall8.jpeg
  6. Select I accept...
  7. Select Next
    WorkstationInstall9.jpeg
  8. Select Run as a Service
  9. Select Next
    WorkstationInstall10.jpeg
  10. Select Complete
  11. Select Next
    WorkstationInstall11.jpeg
  12. Select Install
    WorkstationInstall12.jpeg
  13. Select Finish
  14. Select Exit
  • Disregard and Close the internet window.
WorkstationInstall13.jpeg

Configure Pervasive Settings

Close the old command prompt & Open a new command prompt as Administrator. 

PCC
  1. Select Tools > ODBC Administrator or 32bit ODBC Administrator (Not 64bit).
  2. Select the System DSN > Add (If Agyforms is not already configured).
  3. Choose Pervasive ODBC Client Interface and select Finish.
  4. Type AGYFORMS in the Data Source Name field.
  5. Enter Your Server Name in the Server Name/IP field.
  6. Select Get List.
  7. Verify Agyforms is selected in the drop down box named Database Name.
  8. Select Test and select OK once the Connection Successful box appears.
  9. Select OK to create the Client DSN.
  10. Exit the ODBC Administrator.

Create Agency Systems Icon and Install Crystal Reports

Close the old command prompt & Open a new command prompt as Administrator. 

x:
cd empire
Adduser.exe
  1. If the workstation will have 64 bit Microsoft Office installed (Office, Not Windows), replace Adduser.exe with Adduser.exe /64.
  2. Select Run.
  3. Select Begin.
  4. Select Finish.

Test Agency Systems

  1. Double click the Agency Systems icon.
  2. Agency: 95
  3. Operator: DCS
  4. Password: EMPYRE

Once the application opens, click on one of the tabs to make sure it loads data.

Ic info black 24dp.png See the troubleshooting section above for any errors.

Troubleshoot Error Codes and Other Considerations

Category: Error Codes

Display Issues

Other

Retrieved from "http://wiki.agencysystems.com/index.php?title=Workstation_Installation_Instructions&oldid=7127"