Difference between revisions of "Workstation Installation Instructions"

From Agency Systems Wiki
Jump to navigation Jump to search
Line 1: Line 1:
[[Category:Installation]][[Category:Installing Agency Systems]][[Category:Pervasive]]
+
[[Category:Installation]][[Category:Pervasive]]
  
==Full Workstation Install Instructions==
 
 
*Verify the workstation is running one of the following: Microsoft Windows 8 / Windows 7 / Windows Vista
 
*Verify the workstation is running one of the following: Microsoft Windows 8 / Windows 7 / Windows Vista
  
Line 7: Line 6:
 
   
 
   
 
*You will need to be logged in as a local Administrative user.  
 
*You will need to be logged in as a local Administrative user.  
 +
===Map the Network Drive===
 +
'''Map the drive as an Admin'''
 +
#Click the Microsoft Windows Start Menu.
 +
#Enter '''CMD''' in the start search box.
 +
#Right-click and select '''Run as Administrator'''. This step is critical, even if you are already logged into the machine as Administrator.
 +
#Enter the following commands where X: is the drive letter for your office & "servername" is your actual server's name.
 +
Type '''Net Use x: \\servername\APPS'''
  
===Map Network Drive===
+
'''Map the drive as a User'''
Within '''Both''' command prompt & administrative command prompt
+
#Click the Microsoft Windows Start Menu.
 +
#Enter '''CMD''' in the start search box.
 +
#Left-click to open the command prompt.
 +
#Enter the following commands where X: is the drive letter for your office & "servername" is your actual server's name.
 
  Type '''Net Use x: \\servername\APPS'''
 
  Type '''Net Use x: \\servername\APPS'''
To confirm each cmd prompt has status '''OK'''
 
Type '''Net Use'''
 
  
 
===Installation of Pervasive===
 
===Installation of Pervasive===

Revision as of 19:56, 6 October 2014


  • Verify the workstation is running one of the following: Microsoft Windows 8 / Windows 7 / Windows Vista
  • You will need to be logged in as a local Administrative user.

Map the Network Drive

Map the drive as an Admin

  1. Click the Microsoft Windows Start Menu.
  2. Enter CMD in the start search box.
  3. Right-click and select Run as Administrator. This step is critical, even if you are already logged into the machine as Administrator.
  4. Enter the following commands where X: is the drive letter for your office & "servername" is your actual server's name.
Type Net Use x: \\servername\APPS

Map the drive as a User

  1. Click the Microsoft Windows Start Menu.
  2. Enter CMD in the start search box.
  3. Left-click to open the command prompt.
  4. Enter the following commands where X: is the drive letter for your office & "servername" is your actual server's name.
Type Net Use x: \\servername\APPS

Installation of Pervasive

Run command prompt as Administrator(This step is critical)

Type CD X:\empire
Type PSQL11.3Client32.exe

Take all defaults, EXCEPT you need Install as Service selected

Open a new command prompt as Administrator

Type PCC
  1. Select Tools > ODBC Administrator or 32bit ODBC Administrator
    1. Not 64bit
  2. Select the System DSN > Add (If Agyforms is not already configured)
  3. Choose Pervasive ODBC Client Interface and select Finish
  4. Within the Data Source Name field
Type AGYFORMS
  1. Enter Your Server Name:
"ServerName" 
  1. Select Get List
    1. Leave everything else default
  2. Verify Agyforms is selected in the drop down box named Database Name
  3. Select Test and select OK once the Connection Successful box appears.
  4. Select OK to create the Client DSN.
  5. Exit the ODBC Administrator.

Setup Agency Systems Icon & Crystal Reports

Run a new command prompt as Administrator

Type CD X:\empire
Type Adduser.exe
  1. If the workstation will have 64bit Microsoft Office installed (Office, Not Windows), replace Adduser.exe with Adduser.exe /64
  2. Select Run
  3. Select Begin
  4. Select Finish

Testing Agency Systems

  1. Double click the Agency Systems icon
    1. Sometimes takes a while to load
  2. Agency: 95
  3. Operator: DCS
  4. Password: EMPYRE
    1. Once the application opens, click on one of the tabs to make sure it loads data.

Potential Error Codes After Installation

Error: Crpe32.dll not found

Error: 501 Job Failed

Display Issues Printing Forms or Viewing Window Buttons

Open File Security Warning